The Filament ASA CF: FDM material data sheet

The Filament ASA CF: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

ASA CF (also written ASA-CF) is ASA filament reinforced with chopped carbon fibre, which makes it stiffer than plain ASA and gives a matte surface. The Filament ASA CF is a UV-resistant ASA filament with 3% carbon fibre from Spectrum Group, with a matte, carbon-look finish.

The maker recommends a hardened nozzle, a nozzle temperature of 230 to 270 °C and a bed of 75 to 100 °C, with a closed chamber for larger prints.

Key properties of The Filament ASA CF

Typical values from the Spectrum Group data sheet (prepared 23 July 2025).

PropertyTypical valueTest method
Tensile strength at yield66 MPaISO 527
Tensile strength at break59 MPaISO 527
Elongation at break2%ISO 527
Impact strength (Charpy)5.7 kJ/m²ISO 179
Heat deflection temperature88 °CASTM D648
Vicat softening temperature96 °CASTM D1525
Specific gravity1.12 g/cm³ISO 1183
Melt flow index (220 °C, 10 kg)7.6 g/10 minISO 1133
Nozzle temperature230 to 270 °C-
Bed temperature75 to 100 °C-

What The Filament ASA CF is used for

Printer and process compatibility

FDM printers with a hardened nozzle. A closed chamber is recommended for larger prints.

The Filament ASA CF from Complete Fabrication

Complete Fabrication prints parts in The Filament ASA CF at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

See our FDM 3D printing service for the other filaments we run and how we choose between them.

Download The Filament ASA CF data sheet

Technical data sheet (PDF)

Designing and printing with The Filament ASA CF

ASA-CF is a sensible outdoor choice, and plain ASA is also worth considering. We do not promise a lifespan, because sunlight, colour, temperature and loading all affect it.

  • For working temperatures around 80 °C we look at solid ASA, ASA-CF or PC first, and we test the finished part under its actual load.
  • Starting points for ASA: a minimum wall of 1.2 mm, holes and pins of 2 mm diameter and text 4 mm high.
  • Acetone attacks ABS and ASA, so avoid it for cleaning.
  • ASA needs careful temperature control. Large flat bases, sharp corners and uneven sections are common warping trouble spots, and rounded corners and good orientation help.
  • As a carbon-filled grade it adds stiffness and dimensional stability, but it is not necessarily tougher in every direction. It can have a textured surface, comes in fewer colours and needs a wear-resistant nozzle.

See the full FDM design guide.

The Filament ASA CF questions

What is The Filament ASA CF?

The Filament ASA CF is a UV-resistant ASA filament with 3% carbon fibre from Spectrum Group, with a matte, carbon-look finish.

What is the tensile strength of The Filament ASA CF?

The Filament ASA CF has a typical tensile strength of 66 MPa (ISO 527), according to the Spectrum Group data sheet.

What is the heat deflection temperature of The Filament ASA CF?

The Spectrum Group data sheet gives The Filament ASA CF a heat deflection temperature of 88 °C.

What is The Filament ASA CF used for?

The Filament ASA CF is used for UV-resistant outdoor parts, durable functional prototypes and parts with a matte carbon-fibre look.

Can Complete Fabrication make parts in The Filament ASA CF?

Yes. Complete Fabrication prints parts in The Filament ASA CF at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

Is The Filament ASA CF suitable for outdoor use?

Yes. ASA-CF is a sensible outdoor choice, and plain ASA is worth considering too. We do not promise a lifespan, because sunlight, colour, temperature and loading all affect it.

Does ASA-CF warp when printing?

ASA needs careful temperature control. Large flat bases, sharp corners and uneven sections are common trouble spots, and rounded corners, good orientation and controlled temperatures help.

Related FDM materials

Values are typical figures from the Spectrum Group data sheet, 23 July 2025. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote.

Need parts in this material? We run a UK-wide 3D printing service with overnight delivery, including FDM 3D printing, and our rapid prototyping services also cover CNC machining and vacuum casting.