Bambu PPA-CF: FDM material data sheet

Bambu PPA-CF: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

PPA-CF (also written PPA CF) is polyphthalamide, a semi-aromatic nylon, reinforced with chopped carbon fibre. Bambu PPA-CF is a carbon-fibre reinforced semi-aromatic nylon filament from Bambu Lab for engineering parts that must stay stiff in humid or hot conditions, with a heat deflection temperature of 227 °C at 0.45 MPa.

It is very stiff in the print plane, with an X-Y tensile strength of 168 MPa, though strength across layers (Z) is much lower, at 57 MPa. Printing needs a hot nozzle, a heated chamber and thorough drying.

Key properties of Bambu PPA-CF

Typical values from the Bambu Lab data sheet (V1.0), printed on an X1C at 290 °C nozzle, 110 °C bed, 52 °C chamber and 100% infill.

PropertyTypical valueTest method
Tensile strength (X-Y)168 ± 4 MPaISO 527
Tensile strength (Z)57 ± 5 MPaISO 527
Young's modulus (X-Y)11,800 ± 670 MPaISO 527
Young's modulus (Z)4,300 ± 340 MPaISO 527
Breaking elongation (X-Y)3.2 ± 0.4%ISO 527
Bending strength (X-Y)208 ± 6 MPaISO 178
Bending modulus (X-Y)9,860 ± 480 MPaISO 178
Impact strength (X-Y)41.7 ± 2.8 kJ/m²ISO 179
Heat deflection temperature at 1.8 MPa196 °CISO 75
Heat deflection temperature at 0.45 MPa227 °CISO 75
Melting temperature258 °CDSC
Density1.25 g/cm³ISO 1183
Saturated water absorption1.30%25 °C, 55% RH

What Bambu PPA-CF is used for

Printer and process compatibility

Nozzle 280 to 310 °C, bed 100 to 120 °C, chamber 50 to 80 °C. Dry at 100 to 140 °C for 8 to 12 hours. Bambu recommends a 0.6 mm nozzle.

Bambu PPA-CF from Complete Fabrication

Complete Fabrication prints parts in Bambu PPA-CF at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

See our FDM 3D printing service for the other filaments we run and how we choose between them.

Download the Bambu PPA-CF data sheet

Technical data sheet (PDF)

Designing and printing with Bambu PPA-CF

PPA-CF is a specialist grade for higher temperatures. For working temperatures around 120 °C we look at suitable reinforced nylon, PET-CF, PPA-CF or PPS-CF first, and above 120 °C at specialist PPA-CF or PPS-CF grades.

  • A heat-deflection figure does not tell you how a part behaves under sustained load for weeks or months, so we test the finished part under its actual load.
  • Warping depends on the grade. Large flat bases, sharp corners and uneven sections are the usual trouble spots.
  • A fibre-filled part can feel very solid, but stiffness is not the same as toughness. Layer direction, moisture and sustained loading still decide whether it survives the job.
  • Fibre-filled materials can have a textured surface, come in fewer colours and need a wear-resistant nozzle. Loaded features need their own review.

See the full FDM design guide.

Bambu PPA-CF questions

What is Bambu PPA-CF?

Bambu PPA-CF is a carbon-fibre reinforced semi-aromatic nylon filament from Bambu Lab for engineering parts that must stay stiff in humid or hot conditions, with a heat deflection temperature of 227 °C at 0.45 MPa.

What is the tensile strength of Bambu PPA-CF?

Bambu PPA-CF has a typical tensile strength of 168 ± 4 MPa (ISO 527), according to the Bambu Lab data sheet.

What is the heat deflection temperature of Bambu PPA-CF?

The Bambu Lab data sheet gives Bambu PPA-CF a heat deflection temperature at 1.8 MPa of 196 °C.

What is Bambu PPA-CF used for?

Bambu PPA-CF is used for mechanical prototypes, automotive components and stiff parts used in humid or high-temperature environments.

Can Complete Fabrication make parts in Bambu PPA-CF?

Yes. Complete Fabrication prints parts in Bambu PPA-CF at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

What working temperature is Bambu PPA-CF suited to?

For parts working at around 120 °C and above, PPA-CF is one of the grades we look at first, alongside PPS-CF. A data sheet heat deflection figure does not show how a part behaves under sustained load, so we test the finished part under its actual load.

Does a stiff fibre-filled part mean a tough part?

Not necessarily. Stiffness is not the same as toughness. A fibre-filled part can feel very solid, while layer direction, moisture and sustained loading still decide whether it survives the job.

Related FDM materials

Values are typical figures from the Bambu Lab data sheet, V1.0. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote.

Need parts in this material? We run a UK-wide 3D printing service with overnight delivery, including FDM 3D printing, and our rapid prototyping services also cover CNC machining and vacuum casting.