Bambu PA6-GF: FDM material data sheet

Bambu PA6-GF: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

Bambu PA6-GF is a glass-fibre filled nylon 6 filament from Bambu Lab for strong, durable, dimensionally stable engineering parts, with a heat deflection temperature of 182 °C at 0.45 MPa.

Bambu positions it as a more cost-effective alternative to other top-tier engineering filaments. It absorbs moisture, with saturated water absorption of 2.56%, so it must be dried before printing and annealing improves the result.

Need parts in Bambu PA6-GF? We print PA6-GF in-house at our workshop in Whittlesford, near Cambridge, from single functional prototypes to batches, and can finish and assemble them for you.

Key properties of Bambu PA6-GF

Typical values from the Bambu Lab data sheet (V1.0). Specimens were printed at 265 °C nozzle and 100 °C bed with 100% infill, then annealed and dried at 80 °C for 12 hours.

PropertyTypical valueTest method
Tensile strength (X-Y)75 ± 6 MPaISO 527
Tensile strength (Z)27 ± 5 MPaISO 527
Young's modulus (X-Y)2,850 ± 260 MPaISO 527
Breaking elongation (X-Y)3.9 ± 0.8%ISO 527
Bending strength (X-Y)120 ± 6 MPaISO 178
Bending modulus (X-Y)3,670 ± 140 MPaISO 178
Impact strength (X-Y)27.2 ± 2.2 kJ/m²ISO 179
Heat deflection temperature at 1.8 MPa158 °CISO 75
Heat deflection temperature at 0.45 MPa182 °CISO 75
Melting temperature219 °CDSC
Density1.14 g/cm³ISO 1183
Saturated water absorption2.56%25 °C, 55% RH

What Bambu PA6-GF is used for

Printer and process compatibility

Nozzle 260 to 290 °C, bed 80 to 100 °C, chamber 45 to 60 °C. Dry at 80 °C for 8 to 12 hours. Bambu recommends a 0.6 mm nozzle.

Bambu PA6-GF from Complete Fabrication

Complete Fabrication prints parts in Bambu PA6-GF at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

See our FDM 3D printing service for the other filaments we run and how we choose between them.

Download the Bambu PA6-GF data sheet

Technical data sheet (PDF)

Designing and printing with Bambu PA6-GF

Nylon needs the drying cycle for its exact grade, then to be kept dry during printing and storage. Wet filament can pop, string, look rough and bond poorly.

  • Starting points for nylon and reinforced nylon: a minimum wall of 1.8 mm, holes and pins of 3 mm diameter and text 5 mm high.
  • For working temperatures around 120 °C, suitable reinforced nylon is one of the first materials we look at. We test the finished part under its actual load.
  • Nylons need careful control to limit warping. Large flat bases, sharp corners and uneven sections are the usual trouble spots.
  • Glass-filled grades add stiffness and dimensional stability, but they are not necessarily tougher in every direction. They can have a textured surface, come in fewer colours and need a wear-resistant nozzle.
  • Nylon needs careful preparation before coating, and often needs specialist adhesives or mechanical joints.

See the full FDM design guide.

Bambu PA6-GF questions

What is Bambu PA6-GF?

Bambu PA6-GF is a glass-fibre filled nylon 6 filament from Bambu Lab for strong, durable, dimensionally stable engineering parts, with a heat deflection temperature of 182 °C at 0.45 MPa.

What is the tensile strength of Bambu PA6-GF?

Bambu PA6-GF has a typical tensile strength of 75 ± 6 MPa (ISO 527), according to the Bambu Lab data sheet.

What is the heat deflection temperature of Bambu PA6-GF?

The Bambu Lab data sheet gives Bambu PA6-GF a heat deflection temperature at 1.8 MPa of 158 °C.

What is Bambu PA6-GF used for?

Bambu PA6-GF is used for strong, durable engineering parts, dimensionally stable functional prototypes and parts resistant to oil and grease.

Can Complete Fabrication make parts in Bambu PA6-GF?

Yes. Complete Fabrication prints parts in Bambu PA6-GF at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

Does nylon need drying before printing?

Yes. Follow the drying cycle for the exact grade, then keep it dry during printing and storage. Wet filament can pop, string, look rough and bond poorly.

What wall thickness and hole size should I design for in reinforced nylon?

As a starting point, a minimum wall of 1.8 mm, holes and pins of 3 mm diameter and text 5 mm high. These are starting points, not limits, and loaded features need their own review.

Related FDM materials

Values are typical figures from the Bambu Lab data sheet, V1.0. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.

Need parts in this material? We run a UK-wide 3D printing service with overnight delivery, including FDM 3D printing, and our rapid prototyping services also cover CNC machining and vacuum casting.