eSUN PETG: FDM material data sheet

eSUN PETG: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

eSUN PETG is a tough, translucent PETG filament with water and chemical resistance that eSUN rates as tougher than ABS, and easy to print without an enclosure.

The data sheet recommends an extruder temperature of 230 to 250 °C and a bed temperature of 75 to 90 °C.

Key properties of eSUN PETG

Typical values from the eSUN data sheet (version 4.0, November 2021). eSUN states the properties come from injection-moulded specimens.

PropertyTypical valueTest method
Tensile strength52.2 MPaGB/T 1040
Elongation at break83%GB/T 1040
Flexural strength58.1 MPaGB/T 9341
Flexural modulus1,073 MPaGB/T 9341
Impact strength (Izod)4.7 kJ/m²GB/T 1843
Heat distortion temperature64 °CGB/T 1634
Density1.27 g/cm³GB/T 1033
Melt flow index (190 °C, 2.16 kg)20 g/10 minGB/T 3682
Extruder temperature230 to 250 °C-
Build platform temperature75 to 90 °C-

What eSUN PETG is used for

Printer and process compatibility

FDM printers with a 230 to 250 °C extruder and a heated bed.

eSUN PETG from Complete Fabrication

Complete Fabrication prints parts in eSUN PETG at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

See our FDM 3D printing service for the other filaments we run and how we choose between them.

Download the eSUN PETG data sheet

Technical data sheet (PDF)

Designing and printing with eSUN PETG

We usually start with PETG for general functional parts. As a starting point, allow a minimum wall of 1.2 mm, holes and pins of 2 mm diameter and text 4 mm high. Loaded features need their own review.

  • FDM parts hold about ±0.4 mm on suitable rigid parts. For a sliding fit, start with 0.2 to 0.3 mm clearance per side and test it.
  • PETG often tolerates brief IPA cleaning, but wiping and soaking are different. Check the cleaner, the exposure time and any paint or adhesive.
  • Colour depends on current stock. Rigid parts can be painted to an approved colour sample.

See the full FDM design guide.

eSUN PETG questions

What is eSUN PETG?

eSUN PETG is a tough, translucent PETG filament with water and chemical resistance that eSUN rates as tougher than ABS, and easy to print without an enclosure.

What is the tensile strength of eSUN PETG?

eSUN PETG has a typical tensile strength of 52.2 MPa (GB/T 1040), according to the eSUN data sheet.

What is the heat deflection temperature of eSUN PETG?

The eSUN data sheet gives eSUN PETG a heat distortion temperature of 64 °C.

What is eSUN PETG used for?

eSUN PETG is used for waterproof parts, snap-in parts, signage and display parts and transparent or translucent prints.

Can Complete Fabrication make parts in eSUN PETG?

Yes. Complete Fabrication prints parts in eSUN PETG at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

What wall thickness and hole size should I design for in PETG?

As a starting point, a minimum wall of 1.2 mm, holes and pins of 2 mm diameter and text 4 mm high. These are starting points, not limits, and loaded features need their own review.

Can PETG parts be cleaned with IPA?

PETG often tolerates brief IPA cleaning, but wiping and soaking are different. Check the cleaner, the exposure time and any paint or adhesive before relying on it.

Related FDM materials

Values are typical figures from the eSUN data sheet, Version 4.0, November 2021. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote.

Need parts in this material? We run a UK-wide 3D printing service with overnight delivery, including FDM 3D printing, and our rapid prototyping services also cover CNC machining and vacuum casting.