Eryone ASA-CF is a carbon-fibre filled ASA filament for outdoor use, with UV and cold-weather resistance and a stiffness that Eryone puts 60% above ordinary ASA.
Eryone ASA-CF is a carbon-fibre filled ASA filament for outdoor use, with UV and cold-weather resistance and a stiffness that Eryone puts 60% above ordinary ASA.
The carbon fibre also reduces edge curl during printing, which helps dimensional accuracy. It prints with a matte finish and suits garden tools, outdoor furniture and protective cases.
Typical values from the Eryone data sheet (version 1.0, August 2024). Samples were printed at 260 °C with a bed at 95 °C and 100% infill.
| Property | Typical value | Test method |
|---|---|---|
| Tensile strength (X-Y) | 39.1 MPa | GB/T 1040.4 |
| Tensile modulus (X-Y) | 1,934.7 MPa | GB/T 1040.1 |
| Elongation at break (X-Y) | 2.3% | GB/T 1040.4 |
| Bending strength | 60.1 MPa | GB/T 9341 |
| Bending modulus | 2,531.9 MPa | GB/T 9341 |
| Charpy impact strength | 12.0 kJ/m² | GB/T 1043.1 |
| Heat distortion temperature | 86 °C | ASTM D648 |
| Vicat softening temperature | 108 °C | ASTM D1525 |
| Density | 1.17 g/cm³ | ASTM D792 |
| Nozzle temperature | 240 to 280 °C | - |
| Bed temperature | 90 to 110 °C | - |
FDM printers with an enclosure, a 240 to 280 °C nozzle and a heated bed. Dry at 80 °C for 4 hours before printing.
Complete Fabrication prints parts in Eryone ASA-CF at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Eryone ASA-CF is a carbon-fibre filled ASA filament for outdoor use, with UV and cold-weather resistance and a stiffness that Eryone puts 60% above ordinary ASA.
Eryone ASA-CF has a typical tensile strength of 39.1 MPa (GB/T 1040.4), according to the Eryone data sheet.
The Eryone data sheet gives Eryone ASA-CF a heat distortion temperature of 86 °C.
Eryone ASA-CF is used for garden tools, outdoor furniture, electronic product protective cases and stiff parts that need UV resistance.
Yes. Complete Fabrication prints parts in Eryone ASA-CF at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Eryone data sheet, Version 1.0, August 2024. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
