SuperHDT (ENGR-T23L): DLP material data sheet

SuperHDT (ENGR-T23L): properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

SuperHDT (ENGR-T23L) is an engineering resin from 3DMaterials, made in Korea, with a heat deflection temperature of 240 °C for precise prototypes that need high temperature resistance.

The data sheet gives properties for post-cured parts printed on a monochrome LCD printer. It trades ductility for heat resistance, with elongation under 2%.

Need parts in SuperHDT (ENGR-T23L)? We print it in-house at our workshop in Whittlesford, near Cambridge, for heat-resistant prototypes and fixtures, and can finish and assemble the parts for you.

Key properties of SuperHDT (ENGR-T23L)

Post-cured values from the 3DMaterials data sheet. Parts were printed on a monochrome LCD printer at 50 µm and post-cured with 20 mW/cm² of 395 nm LED light for 10 minutes.

PropertyTypical valueTest method
Tensile strength at yield39.5 MPaASTM D638
Secant modulus3,011 MPaASTM D638
Elongation at breakUnder 2.0%ASTM D638
Heat deflection temperature at 0.45 MPa (65 psi)240 °CASTM D648

What SuperHDT (ENGR-T23L) is used for

Printer and process compatibility

Tested on a monochrome LCD printer with 395 nm post-cure.

SuperHDT (ENGR-T23L) from Complete Fabrication

Complete Fabrication prints parts in SuperHDT (ENGR-T23L) at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

Download the SuperHDT (ENGR-T23L) data sheet

Data sheet (image)

SuperHDT (ENGR-T23L) questions

What is SuperHDT (ENGR-T23L)?

SuperHDT (ENGR-T23L) is an engineering resin from 3DMaterials, made in Korea, with a heat deflection temperature of 240 °C for precise prototypes that need high temperature resistance.

What is the tensile strength of SuperHDT (ENGR-T23L)?

SuperHDT (ENGR-T23L) has a typical tensile strength of 39.5 MPa (ASTM D638), according to the 3DMaterials data sheet.

What is the heat deflection temperature of SuperHDT (ENGR-T23L)?

The 3DMaterials data sheet gives SuperHDT (ENGR-T23L) a heat deflection temperature at 0.45 MPa (65 psi) of 240 °C.

What is SuperHDT (ENGR-T23L) used for?

SuperHDT (ENGR-T23L) is used for precise prototypes with high temperature resistance and heat-exposed fixtures and test parts.

Can Complete Fabrication make parts in SuperHDT (ENGR-T23L)?

Yes. Complete Fabrication prints parts in SuperHDT (ENGR-T23L) at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

Related DLP materials

Values are typical figures from the 3DMaterials data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.

Need parts in this resin? We print it in-house through our 3D printing service, alongside SLA 3D printing. See also our rapid prototyping services.

Need parts in this resin? We run a UK-wide 3D printing service with overnight delivery, and our rapid prototyping services also cover CNC machining and vacuum casting.