Loctite 3D IND147 High Temperature Black is a heat-resistant photopolymer from Henkel with a heat deflection temperature above 230 °C, used for tooling and moulds that see high temperatures at low pressure.
Loctite 3D IND147 High Temperature Black is a heat-resistant photopolymer from Henkel with a heat deflection temperature above 230 °C, used for tooling and moulds that see high temperatures at low pressure.
It combines good dimensional stability and surface finish with enough toughness to withstand moulding stresses, which makes it a fit for polyurethane and silicone moulding.
Post-processed values for IND147 Black from the Henkel data sheet (version 2024/05/08). Values depend on following Henkel's validated workflow.
| Property | Typical value | Test method |
|---|---|---|
| Young's modulus | 3,190 ± 80 MPa | ASTM D638 |
| Tensile stress at break | 67 ± 16 MPa | ASTM D638 |
| Elongation at break | 2.4 ± 0.7% | ASTM D638 |
| Flexural modulus | 3,690 ± 60 MPa | ASTM D790 |
| Flexural stress at break | 120 ± 4 MPa | ASTM D790 |
| Impact strength (Izod, notched) | 14.6 J/m | ASTM D256 |
| Hardness | Shore D 94 | ASTM D2240 |
| Heat deflection temperature at 0.455 MPa | 235 to 291 °C | ASTM D648 |
| Heat deflection temperature at 1.82 MPa | 136 to 163 °C | ASTM D648 |
| Water absorption (24 hours) | 0.24% | ASTM D570 |
| Solid density | 1.26 g/cm³ | ASTM D792 |
| Thermal conductivity | 0.20 W/(m·K) | ASTM D5930 |
| Liquid viscosity at 25 °C | 1,900 to 2,300 cP | - |
Complete Fabrication prints parts in Loctite 3D IND147 High Temperature Black at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Loctite 3D IND147 High Temperature Black is a heat-resistant photopolymer from Henkel with a heat deflection temperature above 230 °C, used for tooling and moulds that see high temperatures at low pressure.
Loctite 3D IND147 High Temperature Black has a typical tensile strength of 67 ± 16 MPa (ASTM D638), according to the Henkel Loctite data sheet.
The Henkel Loctite data sheet gives Loctite 3D IND147 High Temperature Black a heat deflection temperature at 0.455 MPa of 235 to 291 °C.
Loctite 3D IND147 High Temperature Black has a hardness of Shore D 94 (ASTM D2240), according to the Henkel Loctite data sheet.
Loctite 3D IND147 High Temperature Black is used for tooling at high temperature and low pressure, moulds for polyurethane and silicone moulding, prototyping of high-temperature parts and customised moulds.
Yes. Complete Fabrication prints parts in Loctite 3D IND147 High Temperature Black at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Henkel Loctite data sheet, Version 2024/05/08. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
