Liqcreate Flexible-X: DLP material data sheet

Liqcreate Flexible-X: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

Liqcreate Flexible-X is an extremely flexible, soft black photopolymer for DLP, LCD and laser-based 3D printers, used for soft-touch and elastic parts.

Printed parts have a hardness of Shore A 55, high elongation and good rebound, with durable soft-touch behaviour.

Key properties of Liqcreate Flexible-X

Preliminary technical data from Liqcreate. Parts cured for 30 minutes in a high-power LED cure at 20 °C, in glycerol or water.

PropertyTypical valueTest method
HardnessShore A 55ASTM D2240
Tensile strength2.4 MPaASTM D638M
Elongation at break120 to 160%ASTM D638M
Tear strength14.9 kN/mASTM D624
Compression set (24 hours at 22 °C)2%ASTM D395
Water sorption3.3%ASTM D570-98
Liquid viscosity at 25 °C950 cps-
Liquid density1.18-

What Liqcreate Flexible-X is used for

Printer and process compatibility

Asiga, Anycubic Photon, Elegoo Mars, and open DLP, LCD and SLA printers in the 385 to 420 nm range.

Liqcreate Flexible-X from Complete Fabrication

Complete Fabrication prints parts in Liqcreate Flexible-X at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

Download the Liqcreate Flexible-X data sheet

Technical data sheet (PDF)

Liqcreate Flexible-X questions

What is Liqcreate Flexible-X?

Liqcreate Flexible-X is an extremely flexible, soft black photopolymer for DLP, LCD and laser-based 3D printers, used for soft-touch and elastic parts.

What is the tensile strength of Liqcreate Flexible-X?

Liqcreate Flexible-X has a typical tensile strength of 2.4 MPa (ASTM D638M), according to the Liqcreate data sheet.

How hard is Liqcreate Flexible-X?

Liqcreate Flexible-X has a hardness of Shore A 55 (ASTM D2240), according to the Liqcreate data sheet.

What is Liqcreate Flexible-X used for?

Liqcreate Flexible-X is used for soft-touch and elastic parts for industrial use, seals, grips and flexible covers and parts that need strong rebound after bending.

Can Complete Fabrication make parts in Liqcreate Flexible-X?

Yes. Complete Fabrication prints parts in Liqcreate Flexible-X at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

Related DLP materials

Values are typical figures from the Liqcreate data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote.

Need parts in this resin? We print it in-house through our 3D printing service, alongside SLA 3D printing. See also our rapid prototyping services.