Rigid110 is a rigid, high-strength photopolymer from Magforms Technology for 405 nm DLP and LCD printers, used for shell parts, jewellery moulds and dental models.
Rigid110 is a rigid, high-strength photopolymer from Magforms Technology for 405 nm DLP and LCD printers, used for shell parts, jewellery moulds and dental models.
It has low viscosity and cleans up easily, with good accuracy and dimensional stability. It comes in several colours including white, dark grey, black and blue.
Typical values from the Magforms data sheet. The sheet also lists ABS values for comparison.
| Property | Typical value | Test method |
|---|---|---|
| Tensile strength | 42.7 MPa | ASTM D638M |
| Tensile modulus | 2,900 MPa | ASTM D638M |
| Elongation at break | 33.1% | ASTM D638M |
| Flexural strength | 77.4 MPa | ASTM D790 |
| Flexural modulus | 1,674.1 MPa | ASTM D790 |
| Impact strength (Izod, notched) | 39.3 J/m | ASTM D256 |
| Water absorption | 0.43% | ASTM D570 |
| Hardness | Shore D 85 | ASTM D2241 |
| Heat deflection temperature | 65 °C | Easy method |
| Shrinkage (XY) | -0.24% in X and Y | - |
| Liquid viscosity at 30 °C | 402 mPa·s | - |
| Liquid density at 25 °C | 1.13 g/ml | - |
Stereolithography DLP and LCD 3D printers using 405 nm light.
Complete Fabrication prints parts in Rigid110 at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Rigid110 is a rigid, high-strength photopolymer from Magforms Technology for 405 nm DLP and LCD printers, used for shell parts, jewellery moulds and dental models.
Rigid110 has a typical tensile strength of 42.7 MPa (ASTM D638M), according to the Magforms Technology data sheet.
The Magforms Technology data sheet gives Rigid110 a heat deflection temperature of 65 °C.
Rigid110 has a hardness of Shore D 85 (ASTM D2241), according to the Magforms Technology data sheet.
Rigid110 is used for shell parts, jewellery moulds, dental and teeth models and parts needing high hardness and strength.
Yes. Complete Fabrication prints parts in Rigid110 at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Magforms Technology data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
