Sunlu Nylon-Like Resin is a PA-like photopolymer for LCD and DLP printers, with high elongation and a matte finish, used for tough parts that can be drilled and tapped.
Sunlu Nylon-Like Resin is a PA-like photopolymer for LCD and DLP printers, with high elongation and a matte finish, used for tough parts that can be drilled and tapped.
The maker describes it as balancing toughness, strength and hardness, with wear and scratch resistance. It comes in black, white, light grey, dark grey and skin tone and cures at 365 to 405 nm.
Typical values from the Sunlu data sheet.
| Property | Typical value | Test method |
|---|---|---|
| Tensile strength | 35 MPa | ISO 527/2 |
| Elongation at break | 48% | ISO 527/2 |
| Flexural strength | 42 MPa | ISO 178 |
| Flexural modulus | 1,053 MPa | ISO 178 |
| Impact strength (Izod, notched) | 108 J/m | ISO 180 |
| Hardness | Shore D 80 | ISO 868 |
| Heat deflection temperature at 0.45 MPa | 50 °C | ISO 75 |
| Glass transition (Tg) | 44 °C | ISO 11357-2 |
| Liquid viscosity at 25 °C | 400 ± 50 mPa·s | ISO 2555 |
| Solid density | 1.1398 g/cm³ | ISO 1183 |
| Curing wavelength | 365 to 405 nm | - |
LCD and DLP printers curing at 365 to 405 nm.
Complete Fabrication prints parts in Sunlu Nylon-Like Resin at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Sunlu Nylon-Like Resin is a PA-like photopolymer for LCD and DLP printers, with high elongation and a matte finish, used for tough parts that can be drilled and tapped.
Sunlu Nylon-Like Resin has a typical tensile strength of 35 MPa (ISO 527/2), according to the Sunlu data sheet.
The Sunlu data sheet gives Sunlu Nylon-Like Resin a heat deflection temperature at 0.45 MPa of 50 °C.
Sunlu Nylon-Like Resin has a hardness of Shore D 80 (ISO 868), according to the Sunlu data sheet.
Sunlu Nylon-Like Resin is used for engineering structural parts, figurines and models, custom non-standard parts and toys.
Yes. Complete Fabrication prints parts in Sunlu Nylon-Like Resin at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Sunlu data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
