Siraya Tech Flex TPU Air: FDM material data sheet

Siraya Tech Flex TPU Air: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

Siraya Tech Flex TPU Air is a foaming flexible TPU filament whose hardness and weight change with nozzle temperature, giving printed parts that are up to 50% lighter than standard TPU.

Printing hotter makes the foam lighter and softer: parts measure Shore A 78 at 240 °C down to Shore A 63 at 270 °C. It has a matte, fabric-like finish and comes in black and white.

Key properties of Siraya Tech Flex TPU Air

Typical values from the Siraya Tech data sheet. Properties depend on print temperature, so the table lists values at 240, 250, 260 and 270 °C.

PropertyTypical valueTest method
Hardness (Shore A)78 at 240 °C, 71 at 250 °C, 68 at 260 °C, 63 at 270 °CISO 7619
Printed part density0.88, 0.70, 0.59 and 0.51 g/cm³ at 240, 250, 260 and 270 °CISO 845
Tensile breaking strength10.3, 7.2, 5.0 and 3.8 MPa at 240, 250, 260 and 270 °CISO 527 X-Y
Elongation at break629, 605, 547 and 475% at 240, 250, 260 and 270 °CISO 527 X-Y
Filament density1.15 g/cm³ISO 1183
Melt index (190 °C, 2.16 kg)8 g/10 min-
Recommended nozzle temperature230 to 270 °C (260 °C to start)-
Build plate temperature30 to 45 °C-

What Siraya Tech Flex TPU Air is used for

Printer and process compatibility

Nozzle 0.4 to 0.8 mm. Retraction off. Dry for 4 to 6 hours at 70 to 80 °C before printing.

Siraya Tech Flex TPU Air from Complete Fabrication

Complete Fabrication prints parts in Siraya Tech Flex TPU Air at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

See our FDM 3D printing service for the other filaments we run and how we choose between them.

Download the Siraya Tech Flex TPU Air data sheet

Technical data sheet (PDF)

Designing and printing with Siraya Tech Flex TPU Air

Foaming TPU is more suited to cushioning than to sealing. Foaming grades need their own review, so tell us what the part must do, the loads and the working temperature.

  • TPU starting points: a minimum wall of 1.6 mm, holes and pins of 3 mm diameter and text 5 mm high. It prints more slowly than rigid filaments and fine detail is less crisp.
  • For demanding seals we compare cast silicone or a suitable Carbon elastomer. See flexible gaskets.
  • TPU is harder to sand and needs flexible finishes. It often needs specialist adhesives or mechanical joints.

See the full FDM design guide.

Siraya Tech Flex TPU Air questions

What is Siraya Tech Flex TPU Air?

Siraya Tech Flex TPU Air is a foaming flexible TPU filament whose hardness and weight change with nozzle temperature, giving printed parts that are up to 50% lighter than standard TPU.

What is the tensile strength of Siraya Tech Flex TPU Air?

Siraya Tech Flex TPU Air has a typical tensile strength of 10.3, 7.2, 5.0 and 3.8 MPa at 240, 250, 260 and 270 °C (ISO 527 X-Y), according to the Siraya Tech data sheet.

How hard is Siraya Tech Flex TPU Air?

Siraya Tech Flex TPU Air has a hardness of Shore A 78 at 240 °C, 71 at 250 °C, 68 at 260 °C and 63 at 270 °C (ISO 7619), according to the Siraya Tech data sheet.

What is Siraya Tech Flex TPU Air used for?

Siraya Tech Flex TPU Air is used for lightweight parts for drones and robotics, shock absorption and cushioning, such as insoles and seals, matte-textured wearables and accessories and prototypes needing variable flexibility.

Can Complete Fabrication make parts in Siraya Tech Flex TPU Air?

Yes. Complete Fabrication prints parts in Siraya Tech Flex TPU Air at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

What is foaming TPU best used for?

Cushioning. For sealing and compression set it needs testing, and for demanding seals we compare cast silicone or a suitable Carbon elastomer.

Do foaming TPU parts need a design review?

Yes. Foaming grades need their own review, so tell us what the part must do, the loads and the working temperature.

Related FDM materials

Values are typical figures from the Siraya Tech data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote.

Need parts in this material? We run a UK-wide 3D printing service with overnight delivery, including FDM 3D printing, and our rapid prototyping services also cover CNC machining and vacuum casting.