Eryone PA6-CF: FDM material data sheet

Eryone PA6-CF: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

Eryone PA6-CF is a nylon 6 filament with about 20% carbon fibre, designed for FDM printers, with a heat deflection temperature of 185 °C at 0.45 MPa.

It is stiff and strong, with an X-Y tensile strength of 53 to 55 MPa and a bending strength of 140 to 145 MPa. It needs a sealed or closed printer and a long dry before printing.

Key properties of Eryone PA6-CF

Typical values from the Eryone data sheet (version 1.0, August 2024). Samples were printed at 280 °C with a bed at 100 °C and 100% infill.

PropertyTypical valueTest method
Tensile strength (X-Y)53 to 55 MPaASTM D638
Tensile strength (X-Z)47 to 53 MPaASTM D638
Tensile modulus (X-Y)4,020 to 4,360 MPaASTM D638
Elongation (X-Y)8.9 to 10.3%ASTM D638
Bending strength (X-Y)140 to 145 MPaASTM D790
Bending modulus (X-Y)4,240 to 4,580 MPaASTM D790
Charpy impact strength21.3 to 25.5 kJ/m²ASTM D256
Heat distortion temperature at 0.45 MPa185 °CASTM D648
Density1.09 g/cm³ASTM D792
Nozzle temperature260 to 290 °C-
Bed temperature80 to 100 °C-

What Eryone PA6-CF is used for

Printer and process compatibility

FDM printers with an enclosure. Dry at 80 °C for 12 hours before printing.

Eryone PA6-CF from Complete Fabrication

Complete Fabrication prints parts in Eryone PA6-CF at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

See our FDM 3D printing service for the other filaments we run and how we choose between them.

Download the Eryone PA6-CF data sheet

Technical data sheet (PDF)

Designing and printing with Eryone PA6-CF

Nylon needs the drying cycle for its exact grade, then to be kept dry during printing and storage. Wet filament can pop, string, look rough and bond poorly.

  • Starting points for nylon and reinforced nylon: a minimum wall of 1.8 mm, holes and pins of 3 mm diameter and text 5 mm high.
  • For working temperatures around 120 °C, suitable reinforced nylon is one of the first materials we look at. We test the finished part under its actual load.
  • Nylons need careful control to limit warping. Large flat bases, sharp corners and uneven sections are the usual trouble spots.
  • Carbon-filled grades add stiffness and dimensional stability, but they are not necessarily tougher in every direction. They can have a textured surface, come in fewer colours and need a wear-resistant nozzle.
  • Nylon needs careful preparation before coating, and often needs specialist adhesives or mechanical joints.

See the full FDM design guide.

Eryone PA6-CF questions

What is Eryone PA6-CF?

Eryone PA6-CF is a nylon 6 filament with about 20% carbon fibre, designed for FDM printers, with a heat deflection temperature of 185 °C at 0.45 MPa.

What is the tensile strength of Eryone PA6-CF?

Eryone PA6-CF has a typical tensile strength of 53 to 55 MPa (ASTM D638), according to the Eryone data sheet.

What is the heat deflection temperature of Eryone PA6-CF?

The Eryone data sheet gives Eryone PA6-CF a heat distortion temperature at 0.45 MPa of 185 °C.

What is Eryone PA6-CF used for?

Eryone PA6-CF is used for stiff, strong engineering parts, functional prototypes under load and heat-exposed parts.

Can Complete Fabrication make parts in Eryone PA6-CF?

Yes. Complete Fabrication prints parts in Eryone PA6-CF at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

Does nylon need drying before printing?

Yes. Follow the drying cycle for the exact grade, then keep it dry during printing and storage. Wet filament can pop, string, look rough and bond poorly.

What wall thickness and hole size should I design for in reinforced nylon?

As a starting point, a minimum wall of 1.8 mm, holes and pins of 3 mm diameter and text 5 mm high. These are starting points, not limits, and loaded features need their own review.

Related FDM materials

Values are typical figures from the Eryone data sheet, Version 1.0, August 2024. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote.

Need parts in this material? We run a UK-wide 3D printing service with overnight delivery, including FDM 3D printing, and our rapid prototyping services also cover CNC machining and vacuum casting.