AMD-3 is a hard, low-shrinkage resin from Amera Labs for high-resolution models, in black or grey, for LED, LCD and DLP printers.
AMD-3 is a hard, low-shrinkage resin from Amera Labs for high-resolution models, in black or grey, for LED, LCD and DLP printers.
It cures fast even on low-powered printers, holds straight edges and fine features, and has low odour and low viscosity. A stabilised pigment dispersion means it can sit in the vat for long vertical prints without settling.
Typical values from the Amera Labs data sheet (revision 1, 25 January 2024), tested on a DLP printer at 406 nm with 50 µm layers.
| Property | Typical value | Test method |
|---|---|---|
| Tensile modulus | 3.45 GPa | ISO 527-5A |
| Tensile stress at break | 65.2 MPa | ISO 527-5A |
| Tensile strain at break | 3.3% | ISO 527-5A |
| Flexural modulus | 2.74 GPa | ISO 178 |
| Flexural stress at yield | 83.6 MPa | ISO 178 |
| Compression modulus | 1.57 GPa | ASTM D695 |
| Impact strength (notched) | 2.73 kJ/m² | ASTM D256 |
| Heat deflection temperature at 0.45 MPa | 128.42 °C | ISO 75 |
| Hardness | Shore D 85 | ASTM D2240 |
| Water absorption (24 hours) | 0.392% | ASTM D570 |
| Liquid viscosity at 25 °C | 390 mPa·s | ISO 2555 |
| Solid density | 1.243 g/cm³ | ISO 1183-1 |
MSLA and DLP printers with colour or monochrome LCD screens, including Anycubic, Phrozen, Elegoo, Epax, Longer, Prusa and Asiga. Not for PDMS-based resin trays; use film-based trays such as FEP, NFEP, PFA, ACF or HDF.
Complete Fabrication prints parts in AMD-3 High Resolution Models at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
AMD-3 is a hard, low-shrinkage resin from Amera Labs for high-resolution models, in black or grey, for LED, LCD and DLP printers.
AMD-3 High Resolution Models has a typical tensile strength of 65.2 MPa (ISO 527-5A), according to the Amera Labs data sheet.
The Amera Labs data sheet gives AMD-3 High Resolution Models a heat deflection temperature at 0.45 MPa of 128.42 °C.
AMD-3 High Resolution Models has a hardness of Shore D 85 (ASTM D2240), according to the Amera Labs data sheet.
AMD-3 High Resolution Models is used for high-resolution detailed models, parts that need fine edges and tiny features and long vertical print sessions.
Yes. Complete Fabrication prints parts in AMD-3 High Resolution Models at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Amera Labs data sheet, Revision 1, 25 January 2024. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
