Somos WaterClear Ultra 10122: SLA material data sheet

Somos WaterClear Ultra 10122: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.

Somos WaterClear Ultra 10122 is an optically clear SLA resin that makes colourless, accurate parts with an acrylic-like appearance.

It has a refractive index close to engineering plastics, so clear parts can be used for light transmission tests as well as for lenses, light pipes and master patterns.

Need parts in Somos WaterClear Ultra 10122? Every SLA resin we run, including WaterClear, is kept loaded on its own machine, so CAD received by 5:30 pm is usually delivered the next day when capacity allows, from one-offs to batches. We can finish and assemble the parts too.

Key properties of Somos WaterClear Ultra 10122

UV post-cured values from the Somos data sheet.

PropertyTypical valueTest method
Tensile strength at break56 MPaASTM D638M
Tensile modulus2,880 MPaASTM D638M
Elongation at break7.5%ASTM D638M
Flexural strength84 MPaASTM D790M
Flexural modulus2,490 MPaASTM D790M
Impact strength (Izod, notched)25 J/mASTM D256A
HardnessShore D 87ASTM D2240
Water absorption1.1%ASTM D570
Refractive index (cured)1.52ASTM D542
Glass transition (Tg)44 °C-
Heat deflection temperature at 0.46 MPa47 °C (60 °C after thermal post-cure)ASTM D648
Heat deflection temperature at 1.81 MPa43 °C (50 °C after thermal post-cure)ASTM D648
Liquid viscosity at 30 °CAbout 165 cps-

What Somos WaterClear Ultra 10122 is used for

Somos WaterClear Ultra 10122 from Complete Fabrication

Complete Fabrication prints parts in Somos WaterClear Ultra 10122 at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.

Download the Somos WaterClear Ultra 10122 data sheet

Technical data sheet (PDF)

Somos WaterClear Ultra 10122 questions

What is Somos WaterClear Ultra 10122?

Somos WaterClear Ultra 10122 is an optically clear SLA resin that makes colourless, accurate parts with an acrylic-like appearance.

What is the tensile strength of Somos WaterClear Ultra 10122?

Somos WaterClear Ultra 10122 has a typical tensile strength of 56 MPa (ASTM D638M), according to the Somos (DSM) data sheet.

What is the heat deflection temperature of Somos WaterClear Ultra 10122?

The Somos (DSM) data sheet gives Somos WaterClear Ultra 10122 a heat deflection temperature at 0.46 MPa of 47 °C (60 °C after thermal post-cure).

How hard is Somos WaterClear Ultra 10122?

Somos WaterClear Ultra 10122 has a hardness of Shore D 87 (ASTM D2240), according to the Somos (DSM) data sheet.

What is Somos WaterClear Ultra 10122 used for?

Somos WaterClear Ultra 10122 is used for automotive lenses, bottles, lenses and light pipes.

Can Complete Fabrication make parts in Somos WaterClear Ultra 10122?

Yes. Complete Fabrication prints parts in Somos WaterClear Ultra 10122 at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.

Related SLA materials

Values are typical figures from the Somos (DSM) data sheet, 2020. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.

See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us. CAD received by 5:30 pm is usually delivered the next day when capacity allows, and we aim to quote SLA within 2 hours.

Need parts in this resin? Our SLA 3D printing service has parts ready in 24 hours as standard and delivers overnight across the UK, and our clear 3D printing page shows how we polish clear parts. See also our 3D printing service and rapid prototyping services.