Accura Xtreme: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.
Accura Xtreme is a tough, durable grey SLA resin from 3D Systems, used to replace CNC-machined polypropylene and ABS parts in functional prototypes and short production runs.
It prints with high accuracy, resists breakage, and holds its shape at moderate temperatures, which suits snap fits, enclosures and assemblies that get handled and tested.
Post-cured values for large-frame SLA printers (ranges), from the 3D Systems data sheet.
| Property | Typical value | Test method |
|---|---|---|
| Tensile strength | 38 to 44 MPa | ASTM D638 |
| Tensile modulus | 1,790 to 1,980 MPa | ASTM D638 |
| Elongation at break | 14 to 22% | ASTM D638 |
| Flexural strength | 52 to 71 MPa | ASTM D790 |
| Flexural modulus | 1,520 to 2,070 MPa | ASTM D790 |
| Impact strength | 35 to 52 J/m | ASTM D256 |
| Heat deflection temperature at 0.45 MPa | 62 °C | ASTM D648 |
| Heat deflection temperature at 1.82 MPa | 54 °C | ASTM D648 |
| Glass transition (Tg) | 70 to 74 °C | DMA |
| Hardness | Shore D 86 | - |
| Solid density | 1.19 g/cm³ | - |
| Liquid viscosity at 30 °C | 225 cps | - |
| Colour | Grey | - |
3D Systems ProJet 6000 and 7000, ProX 800 and 950, iPro 8000 and 9000, Viper si2, SLA 5000 and SLA 7000.
Complete Fabrication prints parts in Accura Xtreme at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.
Technical data sheet (PDF)Safety data sheet (PDF)
Accura Xtreme is a tough, durable grey SLA resin from 3D Systems, used to replace CNC-machined polypropylene and ABS parts in functional prototypes and short production runs.
Accura Xtreme has a typical tensile strength of 38 to 44 MPa (ASTM D638), according to the 3D Systems data sheet.
The 3D Systems data sheet gives Accura Xtreme a heat deflection temperature at 0.45 MPa of 62 °C.
Accura Xtreme has a hardness of Shore D 86, according to the 3D Systems data sheet.
Accura Xtreme is used for form, fit and function prototypes, snap-fit assemblies and tough enclosures, consumer electronics components and general purpose prototyping.
Yes. Complete Fabrication prints parts in Accura Xtreme at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.
Values are typical figures from the 3D Systems data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, send your CAD for a quote. CAD received by 5:30 pm is usually delivered the next day when capacity allows, and we aim to quote SLA within 2 hours.
Need parts in this resin? Our SLA 3D printing service has parts ready in 24 hours as standard and delivers overnight across the UK. See also our 3D printing service and rapid prototyping services.