MPC12 Clear: properties, typical uses and data sheet, from Complete Fabrication in Cambridge.
MPC12 is a clear, multipurpose SLA photopolymer from Additive Manufacturing Materials, tuned for functional prototypes, RTV master patterns and investment casting patterns on 355 nm solid-state laser systems.
The resin has low viscosity, so it builds fast and cleans up easily. Post-cured parts are water-resistant, with clarity the data sheet compares to acrylic or polycarbonate mouldings.
Need parts in MPC12 Clear? Every SLA resin we run, including MPC12, is kept loaded on its own machine, so CAD received by 5:30 pm is usually delivered the next day when capacity allows, from one-offs to batches. We can finish and assemble the parts too.
SLA 3D printing · SLA batch production · Send your CAD for a quote
Typical values from the Additive Manufacturing Materials data sheet.
| Property | Typical value | Test method |
|---|---|---|
| Tensile strength | 50 to 56 MPa | ASTM D638M |
| Tensile modulus | 2,700 to 2,920 MPa | ASTM D638M |
| Elongation at break | 8 to 15% | ASTM D638M |
| Elongation at yield | 3 to 4% | ASTM D638M |
| Impact strength (Izod, notched) | 2.05 kJ/m² | ASTM D256A |
| Heat deflection temperature at 0.45 MPa | 49 °C | - |
| Liquid viscosity | 230 cps | - |
Optimised for all rapid prototyping systems using solid-state 355 nm lasers.
Complete Fabrication prints parts in MPC12 Clear at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast, and if you have a deadline, tell us and we will do our best to match it. See all materials we run.
MPC12 is a clear, multipurpose SLA photopolymer from Additive Manufacturing Materials, tuned for functional prototypes, RTV master patterns and investment casting patterns on 355 nm solid-state laser systems.
MPC12 Clear has a typical tensile strength of 50 to 56 MPa (ASTM D638M), according to the Additive Manufacturing Materials data sheet.
The Additive Manufacturing Materials data sheet gives MPC12 Clear a heat deflection temperature at 0.45 MPa of 49 °C.
MPC12 Clear is used for functional prototypes, lenses and optical guides, RTV master patterns and investment casting patterns.
Yes. Complete Fabrication prints parts in MPC12 Clear at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you have a deadline, tell us and we will do our best to match it.
Values are typical figures from the Additive Manufacturing Materials data sheet. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us. CAD received by 5:30 pm is usually delivered the next day when capacity allows, and we aim to quote SLA within 2 hours.
Need parts in this resin? Our SLA 3D printing service has parts ready in 24 hours as standard and delivers overnight across the UK. See also our 3D printing service and rapid prototyping services.