Rapid prototyping 3D printing guide: how SLA and Carbon parts speed up each build, why no tooling is needed, and when to switch to vacuum casting.

By Sebastian Stanley. First published 4 December 2024. Updated October 2026 by Tom Davies-Kent, Director, Complete Fabrication.
Rapid prototyping with 3D printing means turning a CAD file into a 3D printed prototype in a day or two, testing it, and changing the design before the next build. Because there is no tooling, each iteration costs only print time and material. SLA parts are ready in 24 hours as standard and hold about ±0.15 mm, so teams can run several design loops in a week.
A prototype is a pre-production representation of some aspect of a concept or final design (Camburn et al., 2017). Rapid prototyping is the practice of making those representations quickly enough to learn from them while the design can still change.
3D printing, also called additive manufacturing, builds parts layer by layer from a digital model. The CAD file is converted to a mesh, usually STL, then sliced into layers (Wong and Hernandez, 2012). No mould or fixture is needed, so a new design costs nothing to set up.
The two terms overlap but they are not the same thing. Additive manufacturing is a way of making parts, by adding material layer by layer. Rapid prototyping is a purpose: getting a physical part in front of the team quickly, whatever process makes it.
Most rapid prototypes today are additively manufactured, but not all. CNC machining and vacuum casting are also used for rapid prototyping when a part needs a production-grade material, a particular finish or a small batch. For product development teams, the useful question is not "which printer?" but "what does this prototype need to prove, and which process shows that fastest?" Answering it early keeps development time short and helps get a product to market sooner. The SLA, FDM and Carbon DLS pages compare the 3D printing options in detail.
A product usually passes through several kinds of prototype. Each needs a different level of fidelity.
| Prototype | What it tests | Fidelity needed | Good 3D printing route |
|---|---|---|---|
| Concept model | Size, proportion, overall idea | Low; speed matters most | FDM or SLA, unfinished |
| Looks-like model | Appearance, ergonomics, how it feels in the hand | High surface quality | SLA, sanded and painted |
| Works-like prototype | Mechanisms, fits, forces | Accurate dimensions; tough material | SLA in a tough resin, or Carbon DLS |
| Functional testing prototype | Performance under real loads, heat or chemicals | Material close to production | Carbon DLS, or CNC in the real material |
| Pre-production prototype | The final design, ready for manufacture | Production-like material and finish | Vacuum casting from an SLA master, or Carbon DLS |
Matching fidelity to the question saves time. A polished, painted model is wasted on a question a rough print could answer.
We print SLA, Carbon DLS and FDM in-house, and source SLS and MJF through partners. Each has a place.
| Process | Typical accuracy | Surface finish | Best for | Turnaround |
|---|---|---|---|---|
| SLA | ±0.15 mm | Smooth; paints well; can be polished clear | Detailed housings, looks-like models, clear parts, master patterns | 24 hours as standard |
| Carbon DLS | Process-dependent; ask us | Smooth, production-like | Functional parts, elastomers, small parts in quantity | Confirmed at quote |
| FDM | ±0.4 mm | Visible layer lines | Large, simple concept models and fit checks | Confirmed at quote |
| SLS and MJF (through partners) | Varies by supplier | Slightly grainy | Tough nylon parts with no supports | Confirmed at quote |
For a closer comparison, see SLA or Carbon DLS and SLA or FDM for prototyping.
Most of the speed comes from how the loop is run. These four habits make the biggest difference.
Decide what each prototype must prove before you send it. A clear question tells you the process, material and finish.
In a controlled experiment, some designers made several prototypes in parallel before getting feedback. They produced better and more varied results than those who refined one design at a time (Dow et al., 2010). That study tested web adverts, and the same habit works for physical prototypes. With 3D printing, two or three variants cost little more than one.
Thomke and Fujimoto describe "front-loading": moving problem-finding and problem-solving to earlier stages of development. They argue this reduces development time and cost (Thomke and Fujimoto, 2000). Fast prototypes are one of the cheapest ways to do it.
Send STEP files where you can, with cosmetic faces marked. We check every file before printing and tell you if a change would make the part stronger, cleaner or cheaper to make.
SLA is the fastest route. CAD received by 5:30 pm is usually printed overnight and delivered the next day, when capacity allows. Each resin stays loaded on its own machine, so different materials can print at the same time.
Several things add time:
Our standard SLA finish is supports removed and bead blasted, which gives an even, matt surface. From there, parts can be sanded and primed, painted to a Pantone or RAL colour, textured, or polished clear. See clear 3D printing for transparent parts.
Allow for paint in the CAD. A high-gloss finish adds about 0.2 mm, and satin or matt about 0.1 to 0.15 mm, so mating faces need extra clearance.
Switch to another process when the question changes:
Our I-Dration water bottle shows the hand-over. We grew the bottle in two parts on our in-house SLA machine, then vacuum cast them in clear polyurethane and bonded them for a watertight seal.
It is the practice of 3D printing prototypes quickly enough to test them and change the design before the next build. Because no tooling is needed, each new version costs only print time and material, so teams can iterate several times a week.
SLA is the most versatile for detailed housings and looks-like models, with ±0.15 mm accuracy and a 24-hour turnaround. Carbon DLS suits functional parts. FDM suits large, low-cost concept models.
SLA parts are ready in 24 hours as standard. CAD received by 5:30 pm is usually delivered the next day when capacity allows. Painting or polishing adds at least a day, and large parts need more planning.
For one-offs and small numbers, usually yes, because there is no tooling cost. For tens or hundreds of identical parts, vacuum casting often works out better. We price the routes side by side and recommend one.
Yes, if the material suits the test. Carbon DLS resins give parts with injection-moulding-like strength. For tests that need the real engineering material, CNC machining is the better choice.
Send your CAD files and tell us what the prototype needs to prove. We will recommend a process and confirm the cost and timeline. Call +44 1223 836837, email info@compfab.co.uk, or contact us. See also our rapid prototyping services and our UK 3D printing service.
Send your CAD files or drawings and tell us when you need the parts. Call +44 1223 836837 or email info@compfab.co.uk.
Contact us