Carbon EPU Pro 50 and 90 Black are single-part elastomer resins for Carbon DLS printers, with tunable stiffness and an extended pot life, for low-volume development and high-volume production.
Carbon EPU Pro 50 and 90 Black are single-part elastomer resins for Carbon DLS printers, with tunable stiffness and an extended pot life, for low-volume development and high-volume production.
EPU Pro 50 Black is softer and more stretchy, at Shore A 53 and 820% elongation. EPU Pro 90 Black is firmer, at Shore A 88 and 440% elongation.
Typical values from the Carbon data sheet (125561-01 rev B, 8 January 2026), for 0.8 mm test pieces unless stated. Values are listed as Pro 50 / Pro 90.
| Property | Typical value | Test method |
|---|---|---|
| Tensile modulus | 3 MPa / 29 MPa | ASTM D412 Die C |
| Ultimate tensile strength | 14 MPa / 22 MPa | ASTM D412 Die C |
| Elongation at break | 820% / 440% | ASTM D412 Die C |
| Tear strength | 20 kN/m / 45 kN/m | ASTM D624 |
| Flex life at 23 °C and -10 °C | Over 100,000 cycles (both grades) | ASTM D1052 Ross Flex |
| Compression set (23 °C, 72 hours) | 29% / 37% | ASTM D395-B |
| Glass transition (Tg) | -52 °C / -12 °C | ASTM D4065 |
| Hardness | Shore A 53 / 88 | ASTM D2240 |
Carbon DLS (Digital Light Synthesis) printers.
Complete Fabrication prints parts in Carbon EPU Pro 50 and 90 Black at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Carbon EPU Pro 50 and 90 Black are single-part elastomer resins for Carbon DLS printers, with tunable stiffness and an extended pot life, for low-volume development and high-volume production.
Carbon EPU Pro 50 and 90 Black has a typical tensile strength of 14 MPa / 22 MPa (ASTM D412 Die C), according to the Carbon data sheet.
Carbon EPU Pro 50 and 90 Black has a hardness of Shore A 53 / 88 (ASTM D2240), according to the Carbon data sheet.
Carbon EPU Pro 50 and 90 Black is used for low-volume product development, high-volume production of elastomer parts and flexible parts that must survive repeated bending.
Yes. Complete Fabrication prints parts in Carbon EPU Pro 50 and 90 Black at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Carbon data sheet, Rev B, 8 January 2026. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
