Carbon MPU 100 is a polyurethane resin for Carbon DLS printers that pairs mechanical strength with biocompatibility and sterilisability.
Carbon MPU 100 is a polyurethane resin for Carbon DLS printers that pairs mechanical strength with biocompatibility and sterilisability.
The Carbon data sheet gives it an elongation at break of 25% and an ultimate tensile strength of 38 MPa, which makes it useful for tough functional parts in medical and other demanding uses.
Typical values from the Carbon data sheet (doc 108269-01, rev A, updated 5 September 2018). Carbon states values are for reference and comparison only.
| Property | Typical value | Test method |
|---|---|---|
| Tensile modulus | 1,200 MPa | ASTM D638 Type V |
| Ultimate tensile strength | 38 MPa | ASTM D638 Type V |
| Yield strength (0.2% offset) | 14 MPa | ASTM D638 Type V |
| Elongation at break | 25% | ASTM D638 Type V |
| Flexural strength | 44 MPa | ASTM D790 |
| Flexural modulus | 1,000 MPa | ASTM D790 |
| Impact strength (Izod, notched) | 29 J/m | ASTM D256 |
| Heat deflection temperature at 0.455 MPa | 48 °C | ASTM D648 |
| Heat deflection temperature at 1.82 MPa | 38 °C | ASTM D648 |
| Dielectric strength | 14.2 kV/mm | ASTM D149 |
| Liquid resin density | 1.05 g/cm³ | - |
Carbon DLS (Digital Light Synthesis) printers.
Complete Fabrication prints parts in Carbon MPU 100 at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Carbon MPU 100 is a polyurethane resin for Carbon DLS printers that pairs mechanical strength with biocompatibility and sterilisability.
Carbon MPU 100 has a typical tensile strength of 38 MPa (ASTM D638 Type V), according to the Carbon data sheet.
The Carbon data sheet gives Carbon MPU 100 a heat deflection temperature at 0.455 MPa of 48 °C.
Carbon MPU 100 is used for strong functional parts that need biocompatibility and sterilisability, medical device components and housings and tough end-use parts without tooling.
Yes. Complete Fabrication prints parts in Carbon MPU 100 at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Carbon data sheet, Updated 5 September 2018. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
