Carbon RPU 70 is a tough, rigid polyurethane resin for Carbon DLS printers, for parts that need strength, toughness and moderate heat resistance.
Carbon RPU 70 is a tough, rigid polyurethane resin for Carbon DLS printers, for parts that need strength, toughness and moderate heat resistance.
It has a tensile modulus of 1,700 MPa and an ultimate tensile strength of 40 MPa, with a heat deflection temperature of 60 °C at 0.455 MPa and a UL Blue Card listing.
Typical values from the Carbon data sheet (doc 103213-02, rev E, 5 March 2024).
| Property | Typical value | Test method |
|---|---|---|
| Tensile modulus | 1,700 MPa | ASTM D638 Type I |
| Ultimate tensile strength | 40 MPa | ASTM D638 Type I |
| Yield strength | 40 MPa | ASTM D638 Type I |
| Elongation at break | 30% (Type I) and 100% (Type V) | ASTM D638 |
| Flexural modulus | 1,500 MPa | ASTM D790-B |
| Flexural stress at 5% strain | 55 MPa | ASTM D790-B |
| Impact strength (Izod, notched) | 15 J/m | ASTM D256 |
| Heat deflection temperature at 0.455 MPa | 60 °C | ASTM D648 |
| Heat deflection temperature at 1.82 MPa | 45 °C | ASTM D648 |
| Flammability | UL 94 HB (1.5 mm and 3 mm), UL Blue Card file E485325 | UL 94 |
| Dielectric strength | 16 kV/mm | ASTM D149 |
Carbon DLS (Digital Light Synthesis) printers.
Complete Fabrication prints parts in Carbon RPU 70 at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
Carbon RPU 70 is a tough, rigid polyurethane resin for Carbon DLS printers, for parts that need strength, toughness and moderate heat resistance.
Carbon RPU 70 has a typical tensile strength of 40 MPa (ASTM D638 Type I), according to the Carbon data sheet.
The Carbon data sheet gives Carbon RPU 70 a heat deflection temperature at 0.455 MPa of 60 °C.
Carbon RPU 70 is used for tough, rigid functional parts, housings and brackets and parts needing moderate heat resistance.
Yes. Complete Fabrication prints parts in Carbon RPU 70 at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the Carbon data sheet, Rev E, 5 March 2024. They vary with printer, build orientation, post-processing and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:3D printing in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
