6095 is a clear, UV-stabilised two-part polyurethane casting resin that cures to a hard, transparent part with a Shore D hardness of 82.
6095 is a clear, UV-stabilised two-part polyurethane casting resin that cures to a hard, transparent part with a Shore D hardness of 82.
It mixes 100 parts of Part A to 150 parts of Part B by weight, with a pot life of 8 minutes at 25 °C, and cures in a mould at 60 °C or above.
Typical laboratory values from the 6095 data sheet, cured for 60 minutes at a 70 °C mould temperature plus 24 hours at 25 °C. The sheet does not name a maker.
| Property | Typical value | Test method |
|---|---|---|
| Hardness | Shore D 82 | - |
| Tensile strength | 60 MPa | JIS K-7113 |
| Elongation | 30% | JIS K-7113 |
| Bending strength | 80 MPa | JIS K-7171 |
| Flexural modulus | 2,000 MPa | - |
| Impact strength (Izod, V-notch) | 10 kJ/m² | JIS K-7110 |
| Deflection temperature under load (1.80 MPa) | 80 °C | JIS K-7191 |
| Shrinkage | 0.3% | In-house |
| Cured specific gravity | 1.13 | JIS K-7112 |
| Mixing ratio A : B by weight | 100 : 150 | - |
| Pot life at 25 °C (100 g) | 8 minutes | - |
| Time before demoulding | 60 minutes | - |
Vacuum casting with a mould temperature above 60 °C.
Complete Fabrication casts parts in 6095 Clear Polyurethane Resin at Lion Works in Whittlesford, near Cambridge, and finishes, paints and assembles them in house. Email your CAD to Info@compfab.co.uk or call +44 1223 836837. We quote fast. If you need a quote quickly, let us know and we will do our best to match your timings. See all materials we run.
6095 is a clear, UV-stabilised two-part polyurethane casting resin that cures to a hard, transparent part with a Shore D hardness of 82.
6095 Clear Polyurethane Resin has a typical tensile strength of 60 MPa (JIS K-7113), according to its data sheet.
Its data sheet gives 6095 Clear Polyurethane Resin a deflection temperature under load (1.80 MPa) of 80 °C.
6095 Clear Polyurethane Resin has a hardness of Shore D 82, according to its data sheet.
6095 Clear Polyurethane Resin is used for clear cast parts, transparent prototypes and UV-stable clear components.
Yes. Complete Fabrication casts parts in 6095 Clear Polyurethane Resin at its workshop in Whittlesford, near Cambridge. Send CAD to Info@compfab.co.uk. We quote fast, and if you need a quote quickly, let us know and we will do our best to match your timings.
Values are typical figures from the 6095 data sheet. They vary with process, cure schedule and test method, and are not a specification. Check the current data sheet before you design with the material.
See also:vacuum casting in Cambridge, all material data sheets and what affects the price. To get parts made in this material, contact us.
