← All resources

Pre-production prototypes: getting a design ready for manufacture

How pre-production prototypes cut cost and risk: find design flaws before manufacturing, test with users, keep the design flexible and win investor confidence.

Electric scooter prototype lit by a light strip

By Sebastian Stanley. First published 9 October 2024. Updated October 2026 by Tom Davies-Kent, Director, Complete Fabrication.

A pre-production prototype is a near-final version of a product, made to prove that the design works, fits, can be assembled and can be manufactured before production tooling is ordered. It usually comes as a batch of tens to a few hundred identical units, often vacuum cast or Carbon DLS printed. That way, testing, user trials and assembly checks reflect the real product.

Where pre-production prototypes fit

Prototyping often decides a large share of how development resources are spent, and it influences whether a project succeeds (Camburn et al., 2017). Early prototypes explore ideas. Pre-production prototypes close the gap between a working design and a manufacturable one.

Hardware teams often call the build stages before mass production EVT, DVT and PVT.

Build stageQuestion it answersWhat the units look likeTypical way to make them
Engineering validation test (EVT)Does the engineering work?Looks-like and works-like combined for the first time; may still be printedSLA, Carbon DLS, CNC machining
Design validation test (DVT)Does the final design meet every requirement, including user and environmental testing?Production-intent design, in production-like materialsVacuum casting, Carbon DLS, CNC machining
Production validation test (PVT)Can it be made repeatably on the production process?Made on production or bridge toolingInjection moulding, with bridge batches while tools are finished

Pre-production prototypes cover mainly the DVT stage, and the bridge batches either side of it. Not every product needs all three stages, and the names vary between industries. In each case the aim is to find problems while they are still cheap to fix.

What a pre-production prototype should prove

Before you order a batch, list what it needs to prove. Most pre-production prototypes are checked against five things.

  1. Form, fit and function: the parts fit together and do their job on every unit in the batch.
  2. Assembly: the product goes together in a sensible order, with the planned fixings, inserts and clearances.
  3. Finish: colour, gloss and texture match the production specification.
  4. User acceptance: real users understand and like it. A trial batch lets you test with enough people to trust the result.
  5. Manufacturability: the design will mould, cast or machine cleanly at volume.

Why pre-production prototypes save time and money

Changes cost more the later you find them. Thomke and Fujimoto describe how shifting problem-finding to earlier stages, which they call front-loading, can reduce development time and cost. Their examples include digital mock-ups at Boeing and Chrysler. These caught interference problems that are very costly to fix if found as late as first full-scale assembly (Thomke and Fujimoto, 2000).

A pre-production batch is the last cheap place to catch that kind of problem. A change to a silicone mould or a print file takes days. A change to a steel injection mould tool takes much longer and costs far more.

Choosing a process for pre-production prototypes

The right process depends on quantity, material and finish. These are the routes we use.

ProcessTypical quantityAccuracyWhy choose it
SLA 3D printing1 to thousands; typically 20 to 200±0.15 mmNo tooling; fine detail; the design can still change between batches
Vacuum casting10 to 500About ±0.2 mm small parts, up to ±0.7 mm largePolyurethanes that behave like production plastics; self-coloured; injection-moulded look
Carbon DLSSmall parts, up to batches of 1,000Process-dependent; ask usFunctional parts with injection-moulding-like strength, no tooling
CNC machiningOne-offs to small batches±0.10 mmReal engineering plastics and metals; usually 3 days
Injection mouldingThousandsTool-dependentThe production process; bridge batches cover the wait for tooling

Many pre-production batches mix processes, for example vacuum cast housings with machined or printed internal parts.

Vacuum casting: the usual route for pre-production batches

Vacuum casting copies an SLA master pattern in a silicone mould. One mould makes around 20 castings, so a batch of 100 needs a handful of moulds and no steel tooling. Silicone moulds flex, so the part needs no draft angles, although adding draft now helps if the part goes to injection moulding later.

The polyurethanes are pigmented before casting, so the colour runs right through the part. Textures can be painted on the master or applied after casting. Lead time is confirmed at quote; as a guide, 20 small parts take about a week. See vacuum casting vs injection moulding for when each makes sense.

Design for manufacture before you freeze the design

Pre-production is the right time for a design for manufacture (DFM) review. The main checks:

  • Keep wall thickness even, with gradual changes, to avoid sink and warping in moulded parts.
  • Add draft on faces in the mould opening direction if the part will be injection moulded.
  • Remove undercuts or plan for them, because they add mould pieces and cost.
  • Set fit clearances for the process and the paint finish.
  • Choose inserts and fixings to suit the process. We use threaded inserts in cast parts, because cast resin does not tap well.

Our design for manufacture guide explains each rule. We check every file before we make it and tell you if a change would make the part stronger, cleaner or cheaper to make.

Pre-production prototypes for user trials and investors

User trials and hall tests need identical units. If one sample is glossier or stiffer than another, that difference shows up in the research results. Our trial batches are finished to an approved first-off sample, and every unit is checked for finish, colour and function before it leaves.

A realistic pre-production prototype also helps with investors and retailers. People respond to what they can see and hold. We made photography-ready display models of kitchen appliances for the Argos catalogue, combining CNC-machined and SLA parts, finished and branded in-house to a fixed deadline.

Examples from our workshop

  • Owlstone breath analysers. The casework started as one- and two-off prototypes. Over five years it grew into vacuum cast production runs of 10 to 30, bridging trials and higher-volume manufacture.
  • Prism 200 casework for Cambridge Consultants. The case had to meet an IP rating and survive drop testing. Testing showed one weak area, so we added a woven glass-fibre reinforcement in the casting before the sets went into regular production.
  • Zone Dome for Running Unlimited. We chose the most cost-effective process for each component at the likely volumes. Then we designed the unit around those routes and assembled the first production units.
  • Chrome whisky bottle case. We used 3D printed parts to check fit and made sure the design would mould well. The project went on to 1,000 plated injection mouldings.

Common pre-production mistakes

  • A single good unit hides the variation that a batch will show.
  • Feedback from user trials is only useful if the design can still change, so run trials before the design freeze.
  • Changes are cheap in CAD and expensive in steel. Do the DFM review before the tool is ordered.
  • Cast and printed parts have their own tolerance limits. Agree them first, instead of asking for production tolerances.

Pre-production prototype questions

What is a pre-production prototype?

It is a near-final version of a product, made in production-like materials. It proves the design works, fits, can be assembled and can be manufactured before production tooling is ordered. It is usually made as a batch of identical units.

What is the difference between a prototype and a pre-production prototype?

Early prototypes explore ideas and test individual features. A pre-production prototype represents the final design, in materials and finishes close to production, and is used to validate the design and the way it will be made.

How many pre-production prototypes do I need?

Enough to answer your questions with confidence, plus spares. Engineering tests may need a handful; user trials and hall tests often need tens to hundreds. Vacuum casting suits batches of 10 to 500.

What are EVT, DVT and PVT?

They are build stages before mass production. EVT checks the engineering works. DVT checks the final design meets every requirement. PVT checks the product can be made repeatably on the production process.

Is vacuum casting good for pre-production prototypes?

Yes, for batches of 10 to 500. Vacuum cast polyurethanes behave like production plastics, can be self-coloured and textured, and need no steel tooling. One silicone mould makes around 20 castings.

Plan your pre-production batch

Send your CAD files, the quantity and the finish you need. We will price the process options side by side and recommend one. Call +44 1223 836837, email info@compfab.co.uk, or contact us. See also our production workshop for low-volume production.

References

  1. Camburn, B., Viswanathan, V., Linsey, J., Anderson, D., Jensen, D., Crawford, R., Otto, K. and Wood, K. (2017). Design prototyping methods: state of the art in strategies, techniques, and guidelines. Design Science, 3, e13. https://doi.org/10.1017/dsj.2017.10
  2. Thomke, S. and Fujimoto, T. (2000). The effect of "front-loading" problem-solving on product development performance. Journal of Product Innovation Management, 17(2), 128–142. https://doi.org/10.1111/1540-5885.1720128

Talk to us about your project

Send your CAD files or drawings and tell us when you need the parts. Call +44 1223 836837 or email info@compfab.co.uk.

Contact us